Probleme nach Stromausfall

    Hier kommt mal eine Fehlerbeschreibung:

    Auf der Box ist ein ganz normales Neutrino.

    Ich hatte einen Stromausfall in der Wohnung von ungefähr 15 Min.

    Nachdem der Strom wieder da war ist die Box nur noch im Bootloop.

    Ich habe auch schon das Neutrino neu geflasht, aber der Fehler bleibt.

    Die Box zeigt auf dem Display die normale Zeichenkette bis uncompressing,

    auf dem Fernseher ist noch das Startlogo zu sehen - dann folgt der Neustart.

    Ich hoffe ihr könnt mit dieser Beschreibung etwas anfangen.

    Jupp hier kommt mal ein :D Bootlog


    dies sind 2 Durchläufe.



    RESET
    debug: BMon V1.0 mID 01
    debug: feID 7a gtxID 0b
    debug: fpID 5a dsID 01-37.b0.1c.07.00.00-4a
    debug: HWrev X5 SWrev 0.81
    debug: B/Ex/Fl(MB) 32/00/08
    WATCHDOG reset enabled
    dbox2:root> debug:
    BOOTP/TFTP bootstrap loader (v0.3)
    debug:
    debug: Transmitting BOOTP request via broadcast
    debug: Given up BOOTP/TFTP boot
    boot net failed


    Flash-FS bootstrap loader (v1.5)


    Found Flash-FS superblock version 3.1
    Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
    debug: Got Block #0044


    will verify ELF image, start= 0x800000, size= 203620
    verify sig: 262
    Branching to 0x40000



    PPCBoot 1.1.6 (TuxBox) (Mar 13 2003 - 12:11:32)


    CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
    *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
    Watchdog enabled
    Board: DBOX2, Nokia
    I2C: ready
    DRAM: 32 MB
    FLASH: 8 MB
    Scanning JFFS2 FS: . done.
    LCD: ready
    FB: loading - ready
    In: serial
    Out: serial
    Err: serial


    Options:
    1: Console on null
    2: Console on ttyS0
    3: Console on framebuffer
    Select (1-3), other keys to stop autoboot: 0
    ...............................................................
    Un-Protected 63 sectors
    ### FS (cramfs) loading 'vmlinuz' to 0x100000
    ### FS load compleate: 571677 bytes loaded to 0x100000
    ## Booting image at 00100000 ...
    Image Name: dbox2
    Image Type: PowerPC Linux Kernel Image (gzip compressed)
    Data Size: 571613 Bytes = 558 kB = 0 MB
    Load Address: 00000000
    Entry Point: 00000000
    Verifying Checksum ... OK
    Uncompressing Kernel Image ... OK
    Linux version 2.4.20-dbox2 (von alexW) Wer Kernels nachmacht, oder faelscht,
    wir
    d bestraft ;-) #1 Son Apr 13 14:50:18 CEST 2003
    On node 0 totalpages: 8192
    zone(0): 8192 pages.
    zone(1): 0 pages.
    zone(2): 0 pages.
    Kernel command line: root=/dev/mtdblock2 console=ttyS0
    Decrementer Frequency = 252000000/60
    mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
    mpc8xx-wdt: keep-alive trigger activated (PITC: 0x1000)
    Console: colour dummy device 80x25
    Calibrating delay loop... 66.96 BogoMIPS
    Memory: 30964k available (996k kernel code, 348k data, 60k init, 0k highmem)
    Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
    Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
    Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
    Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
    Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
    POSIX conformance testing by UNIFIX
    Linux NET4.0 for Linux 2.4
    Based upon Swansea University Computer Society NET3.039
    Initializing RT netlink socket
    Starting kswapd
    devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
    devfs: boot_options: 0x1
    JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis
    Communications
    AB.
    i2c-core.o: i2c core module
    CPM UART driver version 0.03
    ttyS00 at 0x0280 is a SMC
    ttyS01 at 0x0380 is a SMC
    pty: 256 Unix98 ptys configured
    eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:1f:73:2b
    D-Box 2 flash driver (size->0x800000 mem->0x10000000)
    cfi_cmdset_0001: Erase suspend on write enabled
    Using word write method
    Creating 6 MTD partitions on "D-Box 2 flash memory":
    0x00000000-0x00020000 : "BR bootloader"
    0x00020000-0x00040000 : "flfs (ppcboot)"
    0x00040000-0x00720000 : "root (cramfs)"
    0x00720000-0x00800000 : "var (jffs2)"
    0x00020000-0x00800000 : "flash without bootloader"
    0x00000000-0x00800000 : "complete flash"
    mice: PS/2 mouse device common for all mice
    NET4: Linux TCP/IP 1.0 for NET4.0
    IP Protocols: ICMP, UDP, TCP
    IP: routing cache hash table of 512 buckets, 4Kbytes
    TCP: Hash tables configured (established 2048 bind 4096)
    NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
    VFS: Mounted root (cramfs filesystem) readonly.
    Mounted devfs on /dev
    Freeing unused kernel memory: 60k init
    debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
    debug: WATCHDOG RESET
    debug: BMon V1.0 mID 01
    debug: feID 7a gtxID 0b
    debug: fpID 5a dsID 01-37.b0.1c.07.00.00-4a
    debug: HWrev X5 SWrev 0.81
    debug: B/Ex/Fl(MB) 32/00/08
    WATCHDOG reset enabled
    dbox2:root> debug:
    BOOTP/TFTP bootstrap loader (v0.3)
    debug:
    debug: Transmitting BOOTP request via broadcast
    debug: Given up BOOTP/TFTP boot
    boot net failed


    Flash-FS bootstrap loader (v1.5)


    Found Flash-FS superblock version 3.1
    Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
    debug: Got Block #0044


    will verify ELF image, start= 0x800000, size= 203620
    verify sig: 262
    Branching to 0x40000



    PPCBoot 1.1.6 (TuxBox) (Mar 13 2003 - 12:11:32)


    CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
    *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
    Watchdog enabled
    Board: DBOX2, Nokia
    I2C: ready
    DRAM: 32 MB
    FLASH: 8 MB
    Scanning JFFS2 FS: . done.
    LCD: ready
    FB: loading - ready
    In: serial
    Out: serial
    Err: serial


    Options:
    1: Console on null
    2: Console on ttyS0
    3: Console on framebuffer
    Select (1-3), other keys to stop autoboot: 0
    ...............................................................
    Un-Protected 63 sectors
    ### FS (cramfs) loading 'vmlinuz' to 0x100000
    ### FS load compleate: 571677 bytes loaded to 0x100000
    ## Booting image at 00100000 ...
    Image Name: dbox2
    Image Type: PowerPC Linux Kernel Image (gzip compressed)
    Data Size: 571613 Bytes = 558 kB = 0 MB
    Load Address: 00000000
    Entry Point: 00000000
    Verifying Checksum ... OK
    Uncompressing Kernel Image ... OK
    Linux version 2.4.20-dbox2 (von alexW) Wer Kernels nachmacht, oder faelscht,
    wir
    d bestraft ;-) #1 Son Apr 13 14:50:18 CEST 2003
    On node 0 totalpages: 8192
    zone(0): 8192 pages.
    zone(1): 0 pages.
    zone(2): 0 pages.
    Kernel command line: root=/dev/mtdblock2 console=ttyS0
    Decrementer Frequency = 252000000/60
    mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
    mpc8xx-wdt: keep-alive trigger activated (PITC: 0x1000)
    Console: colour dummy device 80x25
    Calibrating delay loop... 66.96 BogoMIPS
    Memory: 30964k available (996k kernel code, 348k data, 60k init, 0k highmem)
    Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
    Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
    Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
    Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
    Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
    POSIX conformance testing by UNIFIX
    Linux NET4.0 for Linux 2.4
    Based upon Swansea University Computer Society NET3.039
    Initializing RT netlink socket
    Starting kswapd
    devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
    devfs: boot_options: 0x1
    JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis
    Communications
    AB.
    i2c-core.o: i2c core module
    CPM UART driver version 0.03
    ttyS00 at 0x0280 is a SMC
    ttyS01 at 0x0380 is a SMC
    pty: 256 Unix98 ptys configured
    eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:1f:73:2b
    D-Box 2 flash driver (size->0x800000 mem->0x10000000)
    cfi_cmdset_0001: Erase suspend on write enabled
    Using word write method
    Creating 6 MTD partitions on "D-Box 2 flash memory":
    0x00000000-0x00020000 : "BR bootloader"
    0x00020000-0x00040000 : "flfs (ppcboot)"
    0x00040000-0x00720000 : "root (cramfs)"
    0x00720000-0x00800000 : "var (jffs2)"
    0x000200debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
    debug: WATCHDOG RESET
    debug: BMon V1.0 mID 01
    debug: feID 7a gtxID 0b
    debug: fpID 5a dsID 01-37.b0.1c.07.00.00-4a
    debug: HWrev X5 SWrev 0.81
    debug: B/Ex/Fl(MB) 32/00/08
    WATCHDOG reset enabled
    dbox2:root> debug:
    BOOTP/TFTP bootstrap loader (v0.3)
    debug:
    debug: Transmitting BOOTP request via broadcast


    bootloader def. ????


    oder Speicher ???


    oder was sonst :(